Tutorial Basics

From Sketching with Hardware at LMU Wiki

Revision as of 10:26, 12 August 2020 by Skwhadmin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Getting Started with MicroPyton and ESP32/ESP8266

In this part of the tutorial, we explain how to get started with MicroPyton and ESP32/ESP8266. This includes how to write the firmware image on the microcontroller and how to use the python shell to interactively program the ESP32/ESP8266.

Setting Up Software on Your Computer

For developing we use in our class the following software:

uPyCraft IDE which requires Python to be installed
Putty terminal program on Windows or any other terminal program

There is a short video on Youtube (4:20) that shows the software: https://youtu.be/DnBBB8AcvBg

Writing the MicroPython Firmware Image to the ESP32/ESP8266

We use the uPyCraft IDE to write the images to the microcontroller, alternatively esptool.py can be used
the firmware for the ESP32 is available at: http://micropython.org/download/esp32/
the firmware for the ESP8266 is available at: http://micropython.org/download/esp8266/

In the video on Youtube (17:01) we show, how to write the firmware with the uPyCraft IDE: https://youtu.be/_TrKPDOReJc

Retrieved from "http://www.sketching-with-hardware.org/wiki/index.php?title=Tutorial_Basics&oldid=23"