UBISS2024

From Sketching with Hardware at LMU Wiki
Jump to navigation Jump to search

This course is designed as a week-long tutorial to engage with ubiquitous devices in the domain of smart environments and how to use machine learning to build smart devices. Here, we use an Arduino Nano RP2040 Connect.

Schedule

Day 1

  • 16:00-16:15 Lecture: Introduction
  • 16:15-17:15 Lecture: Creating Interactive Smart Objects and Environments
  • 17:15-17:45 Hands-On: Task 1: Getting Started Components, tools, and development environments
  • 17:45-18:00 Lecture: Preview of the Tasks Ahead

Day 2

  • 10:00-10:45 Lecture: ML Development Cycle: data collection, data cleaning, and labeling, selection of the AI/ML approach, hyper-parameter * selection and implementing the model, training the model/system, deploying the model, operations, re-training/continuous improvement
  • 10:45-11:00 Lecture: Challenges of AI/ML on Edge Devices and IoT
  • 11:00-12:00 Hands-On: Task 2: Read Data (accelerometer and analog pin)
  • 12:00-13:00 lunch break
  • 13:00-14:00 Hands-On: Task 3: read data from the accelerometer for 4 different actions, store it, transfer to PC (Arduino IDE)
  • 14:00-14:30 Lecture: Rule-based Systems: how to design them, pros: explainability, cons: it is hard
  • 14:30-15:30 Hands-On: Task 4: analyze the data in Excel/Google sheets and find rules for the 4 actions
  • 15:30-16:00 Coffee break
  • 16:00-16:30 Demo session 1: present your solutions
  • 16:30-17:45 Hands-On: Task 5: Implement your rule-based algorithm, optional include explanations of why the state is recognized (Arduino IDE)
  • 17:45-18:00 Hands-On: Presentations of selected results from Task 5

Day 3

  • 10:00-12:00 Lecture: Introduction to Jupyter Notebooks, training an ML model based on a given data and the self-recorded data set on the PC (* using Google Python Notebooks or personal installation)
  • 12:00-13:00 Lunch break
  • 13:00-15:00 Hands-On: Task 6: Getting Started with Jupyter Notebook Installing Jupyter Notebook for Micropython, controlling LED, reading data, storing data
  • 15:00-15:30 Hands-On: Project specification, Ideation on Project Ideas
  • 15:30-16:00 Coffee break
  • 16:00-16:30 Hands-On: Presentation and discussion of project ideas, group forming (groups of 2 or 3)
  • 16:30-17:00 Lecture: Introduction to ML Libraries (everywhereML)
  • 17:00-18:00 Hands-On: Task 7: Deploy Machine Learning Models Implementing a basic model using everywhereML

Day 4

  • 10:00-10:45 Hands-On: Definition of project, project outline
  • 10:45-11:15 Hands-On: project presentation: 60 sec per team
  • 11:15-12:00 Hands-On: project work
  • 12:00-13:00 Lunch break
  • 13:00-15:00 Hands-On: project work
  • 15:00-15:30 Hands-On: stand-up meeting on project progress
  • 15:30-16:00 Coffee break
  • 16:00-17:30 Hands-On: project work
  • 17:30-18:00 Lecture: How to Evaluate ML Solutions (talk and discussion)

Day 5

  • 10:00-10:30 Hands-On: stand-up meeting — project challenges and solutions
  • 10:30-11:30 Hands-On: project work
  • 11:30-12:00 Lecture: Pitfalls and Challenges in Developing ML/AI for IoT
  • 12:00-13:00 Lunch break
  • 13:00-15:30 Hands-On: project work
  • 15:30-16:00 Coffee break
  • 16:00-16:30 Lecture: Testing and Reporting ML Performance (How to Test the Prototype? & How to Report Performance?)
  • 16:30-17:30 Hands-On: Testing of prototype performance
  • 17:30-18:00 Hands-On: Open issues for the presentation on Saturday, Feedback sessions

Day 6

  • 13:15-18:15: Workshop Result Presentations
  • 18:30-18:50: Debriefing

Tasks

Task 1: Getting Started

Solution Task 1.1: LED Blinking

 1 # Blinky example
 2 
 3 import time
 4 from machine import Pin
 5 
 6 # This is the only LED pin available on the Nano RP2040,
 7 # other than the RGB LED connected to Nano WiFi module.
 8 led = Pin(6, Pin.OUT)
 9 
10 while (True):
11    led.on()
12    time.sleep_ms(250)
13    led.off()
14    time.sleep_ms(200)

Solution Task 1.2 Control external RGB

 1 # RGB example
 2 
 3 import time
 4 from machine import Pin
 5 
 6 # RGB LED connected to Nano WiFi module.
 7 ledG = Pin(2, Pin.OUT)
 8 ledR = Pin(3, Pin.OUT)
 9 ledB = Pin(4, Pin.OUT)
10 print("start")
11 
12 while (True):
13     print("*")
14     ledG.on()
15     ledR.off()
16     ledB.off()
17     time.sleep_ms(250)
18     ledG.off()
19     ledR.on()
20     ledB.off()
21     time.sleep_ms(250)
22     ledG.off()
23     ledR.off()
24     ledB.on()
25     time.sleep_ms(250)

Task 2: Read Data

Solution Task 2.1: Read Accelerometer and Gyro

 1 import time
 2 from lsm6dsox import LSM6DSOX
 3 
 4 from machine import Pin, I2C
 5 lsm = LSM6DSOX(I2C(0, scl=Pin(13), sda=Pin(12)))
 6 
 7 while (True):
 8     accel_data = lsm.accel()
 9     print('Accelerometer: x:{:>8.3f} y:{:>8.3f} z:{:>8.3f}'.format(*accel_data))
10     gyro_data = lsm.gyro()
11     print('Gyroscope:     x:{:>8.3f} y:{:>8.3f} z:{:>8.3f}'.format(*gyro_data))
12     print("")
13     time.sleep_ms(100)

Solution Task 2.2: Read analog values

A0 is the analog input with 16-bit resolution. It reads the analog value every second and print it to the console- 

 1 #Example usage for Arduino Nano
 2 from machine import Pin, ADC
 3 from time import sleep
 4 
 5 analogPin = ADC(Pin(26))
 6 
 7 while True:
 8   analogVal16 = analogPin.read_u16()
 9   print(analogVal16)
10   sleep(1)

Task 6: Getting Started with Jupyter Notebook

Task 6.1: is it moved?

  • read acceleration and gyro
  • calculate the differences between values
  • show an ouput when it is move
  • create a file on the device that logs, when it is moved

Task 6.2: it was turned upside down?

  • read acceleration and gyro
  • make a rule based "AI" that records
    • it was put upside down
    • it was turned 360
    • it was moved "quickly"

Task 7: Deploy Machine Learning Models

We will use https://github.com/eloquentarduino/everywhereml to detect the same gestures as in Task 2.2. For this, install everywhereml: 

pip3 install -U everywhere

Using everywhereml we can train a model on a more powerful machine for deployment on a microcontroller. See https://eloquentarduino.com/posts/micropython-machine-learning for example for such a training process. Assuming that our ML model is trained and stored in variable clf then we can save the model to a file using 

clf.to_micropython_file("MyModel.py")

The MyModel.py file can then be saved and called directly on the microcontroller. To run the model on the microcontroller, assume your data is stored in x and you trained a RandomForestClassifier. Then you can predict via the following code snippet 

import MyModel
clf = MyModel.RandomForestClassifier()
clf.predict(x)

Task 8: Connect to WiFi

This is an optional task.

  • connect both boards to WIFI using Tutorial_Network
  • use the Arduino Nano RP2040 Connect as output (showing a color)
  • use the Arduino Nano RP2040 Connect as input (recognize with rules 3 gestures)

Links

See the full list of links: UBISS2024-Links

Local Links

https://ubicomp.net/sw/db1/var2db.php? http://localhost:8888/notebooks/ArduinoNanoRP2040_v01.ipynb http://localhost:8888/doc/tree/create-ML-model01.ipynb

Reading

Required Reading before the course

Recommended Reading before the course

Random Commands

pip install micropython-lsm6dsox

picotool.exe load -x C:\Users\ru42qak\AppData\Roaming\OpenMV\openmvide\firmware\ARDUINO_NANO_RP2040_CONNECT\firmware.bin

pip install jupyterlab

pip install everywhereml

python -m pip install jupyter

git clone https://github.com/goatchurchprime/jupyter_micropython_kernel.git

pip install -e jupyter_micropython_kernel

python -m notebook

python -m jupyter kernelspec list


C:\Users\ru42qak\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.11_qbz5n2kfra8p0\LocalCache\local-packages\Python311\site-packages\jupyterlab>pip install -e jupyter_micropython_kernel

C:\Users\ru42qak\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.11_qbz5n2kfra8p0\LocalCache\local-packages\Python311\site-packages\jupyterlab>python -m notebook

Retrieved from "http://www.sketching-with-hardware.org/wiki/index.php?title=UBISS2024&oldid=1422"