USB-Power

From Sketching with Hardware at LMU Wiki
Revision as of 11:45, 29 December 2020 by Skwhadmin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This module makes it easy to get to the USB Pins. We use it to connect GND and 5V, e..g for servos or stepper motors.

PowerUSB-module1.JPG

Retrieved from "http://www.sketching-with-hardware.org/wiki/index.php?title=USB-Power&oldid=993"