Difference between revisions of "UBISS2024-Links"

From Sketching with Hardware at LMU Wiki
Jump to navigation Jump to search
 
(8 intermediate revisions by one other user not shown)
Line 2: Line 2:
  
 
== Install the Arduino Nano RP2040 Connect Firmware ==
 
== Install the Arduino Nano RP2040 Connect Firmware ==
* download the firmware for the Arduino Nano RP2040 Connect from https://micropython.org/download/ARDUINO_NANO_RP2040_CONNECT/
+
[[Arduino_Nano_RP2040_Connect#Install the Arduino Nano RP2040 Connect Firmware|Install the Arduino Nano RP2040 Connect Firmware]]
* unplug the board from the computer
 
* force the board in bootloader mode by connecting GND and REC pin with a wire: https://docs.arduino.cc/tutorials/nano-rp2040-connect/rp2040-openmv-setup/
 
* plug the board into the USB port on your computer, it appears as a drive in your filesystem [[File:Drive01.png]]
 
* remove the wire between the GND and REC pin (before you copy the file onto the device) [[File:Arduino01.jpg]]
 
* copy the firmware you downloaded on the drive that showed up in your file system
 
* once it is completely copied to the device, unplug the board and plug in again [[File:Arduino02.jpg]]
 
* now you should be able to use Arduino Lab for Micropython development environment, https://labs.arduino.cc/en/labs/micropython
 
  
 
== alternative ==
 
== alternative ==

Latest revision as of 22:46, 10 June 2024

Getting Started[edit]

Install the Arduino Nano RP2040 Connect Firmware[edit]

Install the Arduino Nano RP2040 Connect Firmware

alternative[edit]

Programming Environment for MiroPython[edit]

Testing your Environment: Get a LED to blink[edit]

Nano RP2040 Connect board details[edit]

MicroPython basics - Tutorial[edit]

List of Links[edit]

Micropython Basics[edit]

Python / Jupyter Notebooks for Hardware[edit]

Development environments[edit]

Libraries[edit]

Data sheets and resources[edit]


Tutorials[edit]

Machine Learning Basics[edit]


everywhereml

TinyML

Networking Basics[edit]