Circuitpython

From Sketching with Hardware at LMU Wiki
Revision as of 09:06, 22 June 2024 by Skwhadmin (talk | contribs)
Jump to navigation Jump to search

Introduction and step by step tutorial from Adafruit

Installing CircuitPython

Go to circuitpython.org/downloads and download the version for your board.

Connect the board to the computer (e.g. Raspberry PI Pico) and the folder RPI-RP2 shows ups in your file system.

Copy the .uf2 into the folder of the board.


Install the Mu Editor

Follow the instructions for installting the Mu Editor.

  • Install it on your system
  • On first start up select CircuitPython as Mode
  • Test if it works in the CircuitPython REPL console
Retrieved from "http://www.sketching-with-hardware.org/wiki/index.php?title=Circuitpython&oldid=1729"