Arduino Lab for MicroPython

Arduino Lab for MicroPython is one IDE to program MicroPython on microcontrollers. It is a simple editor with minimal IDE for Miropython.

Installation

• Install the Arduino IDE to ensure all divers and backend components are installed.
• Download Arduino Lab from (https://labs.arduino.cc/en/labs/micropython) and install it. You can also use it to download and upload files
• There is also a Firmware Installer (https://labs.arduino.cc/en/labs/micropython-installer) that is helpful to put Micropython on the Nano ESP32

Arduino MicroPython Tutorial

https://docs.arduino.cc/micropython/micropython-course/course/introduction-arduino/

MicroPython Examples for different boards

https://docs.arduino.cc/micropython/basics/board-examples/

MicroPython Reference

https://docs.arduino.cc/micropython/basics/reference/