Circuitpython

From Sketching with Hardware at LMU Wiki

Revision as of 09:07, 22 June 2024 by Skwhadmin (talk | contribs) (→‎Installing CircuitPython)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Introduction and step by step tutorial from Adafruit

Installing CircuitPython

Go to circuitpython.org/downloads and download the version for your board.

Connect the board to the computer (e.g. Raspberry PI Pico) and the folder RPI-RP2 shows ups in your file system.

Copy the .uf2 into the folder of the board.

more detailed description on the installation process at adafruit.com

Install the Mu Editor

Follow the instructions for installting the Mu Editor.

download software from codewith.mu

Install it on your system

On first start up select CircuitPython as Mode

Test if it works in the CircuitPython REPL console

Retrieved from "http://www.sketching-with-hardware.org/wiki/index.php?title=Circuitpython&oldid=1730"