Semesterplan and Tasks

Online Session on Thursday 18:00-19:00

Session 1: Introduction (Monday 07th Dec)

Unpacking of the hardware
Install the software on your computer, put the software image onto the ESP8266 D1 mini, see Tutorial Basics
Task 1: Digital IO
- Connect 3 external LEDs and let it blink in different speeds
- Connect a button to a digital input, when the button is pressed all LEDs should be on
Task 2: Analog In, PWM Out
- Connect 1 external LED
- Connect a potentiometer to A0 and read the analog value
- change the brightness of the LED with the analog value (PWM)
- write the analog value to the serial line
Submission:
- For each task submit a video of max 30 seconds (should show the setup, your code ond the screen, an the system functioning)

17th Dec: IO, sensors and actuators
- watch videos: sensors (distance, acceleration), actuatos (stepper, servo)
- hand in basic chip working, digital IO and analog in
- orga: system design in groups of 2
7th Jan: networked system IoT
- watch video: netvars, autostart, building a system
- hand in of reading sensor (distance or acceleration) and moving someting (servo or stepper)
14th Jan: a system, ideation
- watch video: topic introduction, about ideation
- hand in the initial system that exchanges date over the internet (e.g. minimal slider/poti on one side and color chaning RGB LED on the other)
- ideation
- orga: make groups
21th Jan: bigger system and idea presentations
- hand in the version 2 of the system - as a group (from 2 to 4) (improved, fixed)
- group idea presentation
28th Jan: group project
- orga: fix groups, time plan, concept, and time plan

To Check:

Thursday 18-19 - handing in would Wed 23:59 - and Hiwis are available on Wed from 16-20?
or 17-18 on Mon OK?
When do we have a slot for Hiwis

First session with students for WS20/21 on the 7th of Dec - before the open lab day
Presentation of last terms course on Monday 7th as part of the open lab day - 3 Min video + 7 Min discussion

-- giving out HW in week 7th to 11th --- Monday 17-18

07th Dec: Introduction
- watch videos: unpacking, flashing the sw-image, digital IO, analog in, RGB
- intro and telling about the hardware, tasks and planing
- orga: make groups of 2
14th Dec: IO, sensors and actuators
- watch videos: sensors (distance, acceleration), actuatos (stepper, servo)
- hand in basic chip working, digital IO and analog in
- orga: system design in groups of 2
21th Dec: networked system IoT
- watch video: netvars, autostart, building a system
- hand in of reading sensor (distance or acceleration) and moving someting (servo or stepper)
11th Jan: a system, ideation
- watch video: topic introduction, about ideation
- hand in the initial system that exchanges date over the internet (e.g. minimal slider/poti on one side and color chaning RGB LED on the other)
- ideation
- orga: make groups
18th Jan: bigger system and idea presentations
- hand in the version 2 of the system - as a group (from 2 to 4) (improved, fixed)
- group idea presentation
25th Jan: group project
- orga: fix groups, time plan, concept, and time plan