Difference between revisions of "UBISS2024-Links"

From Sketching with Hardware at LMU Wiki
Jump to navigation Jump to search
 
Line 2: Line 2:
  
 
== Install the Arduino Nano RP2040 Connect Firmware ==
 
== Install the Arduino Nano RP2040 Connect Firmware ==
Download the firmware for the Arduino Nano RP2040 Connect from https://micropython.org/download/ARDUINO_NANO_RP2040_CONNECT/
+
[[Arduino_Nano_RP2040_Connect#Install the Arduino Nano RP2040 Connect Firmware|Install the Arduino Nano RP2040 Connect Firmware]]
 
 
Unplug the board from the computer.
 
 
Force the board in bootloader mode by connecting GND and REC pin with a wire:
 
https://docs.arduino.cc/tutorials/nano-rp2040-connect/rp2040-openmv-setup/
 
 
 
[[File:Arduino01a.jpg|200px]]
 
 
 
Plug the board into the USB port on your computer, it appears as a drive in your filesystem
 
 
 
[[File:Drive01.png|200px]]
 
 
 
Remove the wire between the GND and REC pin (before you copy the file onto the device)
 
 
 
 
 
Copy the firmware you downloaded on the drive that showed up in your file system
 
 
 
[[File:file-copy.PNG|200px]]
 
 
 
Once it is completely copied to the device, unplug the board and plug in again
 
 
 
[[File:Arduino02a.PNG|200px]]
 
 
 
Now you should be able to use Arduino Lab for Micropython development environment, https://labs.arduino.cc/en/labs/micropython
 
  
 
== alternative ==
 
== alternative ==

Latest revision as of 23:46, 10 June 2024

Getting Started[edit]

Install the Arduino Nano RP2040 Connect Firmware[edit]

Install the Arduino Nano RP2040 Connect Firmware

alternative[edit]

Programming Environment for MiroPython[edit]

Testing your Environment: Get a LED to blink[edit]

Nano RP2040 Connect board details[edit]

MicroPython basics - Tutorial[edit]

List of Links[edit]

Micropython Basics[edit]

Python / Jupyter Notebooks for Hardware[edit]

Development environments[edit]

Libraries[edit]

Data sheets and resources[edit]


Tutorials[edit]

Machine Learning Basics[edit]


everywhereml

TinyML

Networking Basics[edit]