Circuitpython: Difference between revisions

From Sketching with Hardware at LMU Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
= Installing CircuitPython =
Go to [https://circuitpython.org/downloads circuitpython.org/downloads] and download the version for your board.
Connect the board to the computer (e.g. Raspberry PI Pico) and the folder RPI-RP2 shows ups in your file system.
Copy the .uf2 into the folder of the board.
= Install the Mu Editor =
= Install the Mu Editor =


Line 10: Line 19:


* Test if it works in the CircuitPython REPL console
* Test if it works in the CircuitPython REPL console
= Installing CircuitPython =
Go to [https://circuitpython.org/downloads circuitpython.org/downloads] and download the version for your board.
Connect the board to the computer (e.g. Raspberry PI Pico) and the folder RPI-RP2 shows ups in your file system.
Copy the .uf2 into the folder of the board.

Revision as of 09:05, 22 June 2024

Installing CircuitPython

Go to circuitpython.org/downloads and download the version for your board.

Connect the board to the computer (e.g. Raspberry PI Pico) and the folder RPI-RP2 shows ups in your file system.

Copy the .uf2 into the folder of the board.


Install the Mu Editor

Follow the instructions for installting the Mu Editor.

  • Install it on your system
  • On first start up select CircuitPython as Mode
  • Test if it works in the CircuitPython REPL console