Editing Jupyter Notebook


= Jupyter Notebook as the development environment for MicroPython =

This explains how to configure a local Jupyter Notebook to develop MicroPython code on an ESP32 or ESP8266 device.

== Step-by-Step Setup ==

In this example, we use the Arduino Nano RP2040 Connect and an Arduino Nano ESP32.

The basic steps are
* Install Python (version 3.6 and above) on your computer (or update to the latest version), see https://www.python.org/
* Install Jupyter Notebooks on your computer locally (see the documentation at https://jupyter.org/install)
<syntaxhighlight lang="Bash">
pip install jupyterlab
</syntaxhighlight>

* Install the Kernal that allows you to connect to the Board via USB/REPL, see https://github.com/goatchurchprime/jupyter_micropython_kernel/
<syntaxhighlight lang="Bash">
pip install jupyter_micropython_kernel
python -m jupyter_micropython_kernel.install
</syntaxhighlight>

* Connect the device physically to the computer
* Have as first command to the connection to serial port
* Program the board directly in the notebook, see the output (including sensor streams) directly in the notebook

== Web pages and Tutorials ==
* https://towardsdatascience.com/micropython-on-esp-using-jupyter-6f366ff5ed9


[[File:Jupyter01.PNG]]

[[Category:MicroPython]]
[[Category:Arduino Nano RP2040 Connect]]
[[Category:IDEs]]